Altec LF Enclosure Plans on Pdf.

[Panomaniac]

Guys, let it drop! No offense was meant, even if it did seem that way. It was a misunderstanding.

Don't we have better things to discuss?

[Todd W. White]

Yes - take the rock-throwing war offline.

It was a case of misunderstandings.

Period.

[Audio_by_Goodwill]

I've pulled my posts. Atec Best, your PM box is full.

[Altec Best]

Sorry Guys,for the BS.I deleted messages in my PM box for the guys that were asking for the .pdf I need an address to send it to you.File is too large to post.I can Barely send as an attachment the pdf is 20 pages.Also Audio by Goodwill I edited and deleted my posts as well.My Apologies for any misunderstanding.

if anyone needs the plans they are available:

This is all on 1 .pdf 20pgs.
(210,211,612,614,620,815,816,817,828,849,930,1230, 1233,1234,1242,9842,9844,9849)

And this is on 1 other
8000 series = (8127,8124,8227,8154,8156,8256,8182,8184)

+ (Customizing Altec Loudspeaker Enclosures) is on the last Application Notes AN-5

[aditya]

Hey AB,

I recd the file. Its great !!!

Many thanks
Aditya

[Todd W. White]

Send it to me and I'll post it on the website.

[Altec Best]

Send it to me and I'll post it on the website.

Will do Todd and Thanks.There's alot of good info for folks that who may need now or in the future.


Aditya, Your Welcome I'm glad you can use it.Best Wishes :2thumbsup:

[Todd W. White]

Now available here:

AN-11: Construction Plans for traditional Altec enclosures:

http://alteclansingunofficial.nlenet...osurePlans.pdf

AN-12: Construction Plans for 8000-series (they use the 3000-series woofers) Altec enclosures:

http://alteclansingunofficial.nlenet...osurePlans.pdf

AN-5: Customizing Altec enclosures:

http://alteclansingunofficial.nlenet...Enclosures.pdf

[Altec Best]

There you Go !! :2thumbsup:

Todd I also sent the other plans Customizing & 8000 series for you

[Steve Mac]

Altec Best:
Your inbox was full when I checked!
This may belong in a new post but this is an answer to how I would modify a 511 to an E:

Hi John, Sorry about not checking my messages...not quite settled yet....getting close though! I got my pair from eBay and I paid what every one thinks as too much! I think it was a little more than 600 dollars for the pair. But whatever, it allowed me to listen to GPA's alnico 288H drivers which are insanely good and finish the playback system.
As far as dimensions are concerned, I can certainly help.
I assume you have the expertise to weld and shape aluminum?
1)My first suggestion is to build the plates that mount a 288 driver.
2)remove the hanging rings from the 511b and clean up the surface
3)measure the line to slice the 511b horn (this is where I could help!)
4)slice the 511b
5)weld the mounting plate
6) smooth perfectly the throat from the plate going into the horn on the inside.
...for high end response you need to do the best job you can in this step
7) apply 288 and enjoy!
8) curve open cell foam on the bell lips of the 511e and hear the improvement!
I started to tackle this and never came up with a "finished" idea per se.

Best regards, Steve